We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480163046
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480163046, connect FAMAGA, the world's the best supplier of machine made equipment. Our company has advanced for more than ten years - these are ages of experience, which are illustrated in the quality of products and individual attention to each purchaser. We respect everyone, who cooperated with us - therefore, our regular consumers bring in the most flexible purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such clients, and we constantly make new agreements. More than 750 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Brazil, Turkmenistan, Latvia, Palestine, Switzerland, Mauritania, Andorra, Ghana, Uganda, Austria, Cameroon, Singapore, Cyprus, Tunisia, Belize, Guinea, Suriname, Mongolia, Burundi, Finland, India, Slovakia, Senegal, Argentina, Thailand, Israel, Turkey, Antigua and Barbuda, Nicaragua, Eswatini, Central African Republic, Greece, Armenia, South Korea, Hungary, Kenya, Tanzania, Botswana, Algeria, Indonesia. A advanced logistics connection and a partnership network allow us to conduct our units anywhere in the earth on-time without compromising product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only experts, who already have experience in the direction of factory-made equipment.
All items from FAMAGA are affirmed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this amount is ascending every day. We are glad that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To consult or order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |