We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822245400
Description
| Functional principle | double-acting |
| Cushioning | pneumatically |
| adjustable | |
| Piston diameter | 100 mm |
| Piston rod thread | M20x1,5 |
| Standardization | ISO 15552 |
| Stroke | 25 mm |
| Sealing material | Fluorocaoutchouc |
| Scraper | Fluorocaoutchouc |
| Compressed air connection | G 1/2 |
| Compressed air connection type | Internal thread |
| Temperature resistance | Heat resistant |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting Aventics (brand of Emerson) 0822245400, get in touch with FAMAGA, the world's top supplier of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are described in the quality of spare parts and particular attention to each client. We appreciate everyone, who liased with us - therefore, our regular buyers receive the most acceptable purchase terms and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly make new agreements. More than 750 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Slovakia, Azerbaijan, Indonesia, Lebanon, Togo, Burkina Faso, Eswatini, Bulgaria, Sudan, Ghana, North Korea, Eritrea, United Arab Emirates, Malta, Jordan, Grenada, Dominica, Zambia, Antigua and Barbuda, Pakistan, Nigeria, Hungary, Thailand, Brazil, Australia, Kyrgyzstan, Iran, Cameroon, South Sudan, Norway, Bangladesh, Namibia, Iceland, Mozambique, Rwanda, Macedonia, Kenya, United States, Sierra Leone, Yemen. A well-developed logistics series and a partnership network guide us to ship our items anywhere in the world promptly without compromising product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this number is rising every day. We are pleased that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or book, get in touch with us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| Standards | ISO 15552 |
| Compressed air connection | Internal thread |
| Working pressure min./max. | 1,5 ... 10 bar |
| Ambient temperature min./max. | -10 ... 150 °C |
| Medium temperature min./max. | -10 ... 150 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Die-cast aluminum |
| End cover | Die-cast aluminum |
| Seal | Fluorocaoutchouc |
| Nut for piston rod | Steel, galvanized |
| Scraper | Fluorocaoutchouc |
| Tie-rods | Stainless steel Steel, galvanized |
| See table for additional data on materials. |
