We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822344509
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822344509, call FAMAGA, the world's primary vendor of machine made equipment. Our company has lasted for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each user. We understand everyone, who joined with us - hence, our regular clients get the most favorable purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such customers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Portugal, Madagascar, Cyprus, Sudan, Nicaragua, Papua New Guinea, Mali, Senegal, Peru, Mauritius, Canada, Syria, Cape Verde, Laos, The Bahamas, China, Switzerland, Eritrea, Burkina Faso, Bolivia, Kyrgyzstan, Guatemala, Uzbekistan, El Salvador, Brunei, Zimbabwe, Afghanistan, Japan, Kuwait, Georgia, Tajikistan, Djibouti, Cameroon, Denmark, Finland, Jordan, Malaysia, Seychelles, Egypt, Iran, Swaziland, Botswana, Samoa, Paraguay, Vietnam, Algeria. A well-elaborated logistics connection and a partnership network cheer us to conduct our items anywhere in the world immediately without disreputing product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All spare parts from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are happy that customers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as stay in control.
To consult or order, phone us or write to the online chat on our official website. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |