We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822431202
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Piston diameter | 12 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 25 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822431202, get in touch with FAMAGA, the world's major distributor of mechanized equipment. Our company has existed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and individual attention to each customer. We value everyone, who engaged with us - therefore, our regular clients bring in the most favorable purchase forms and discounts on the machine made streamlined equipment market. Now, there are more than 4500 such buyers, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Ecuador, San Marino, United States, Eritrea, Djibouti, Senegal, Colombia, Slovenia, Afghanistan, Gambia, Mozambique, Kazakhstan, Bolivia, Poland, Mauritania, The Gambia, Panama, Syria, Belarus, Equatorial Guinea, Morocco, Ukraine, Luxembourg, Uzbekistan, Cyprus, Chad, Vietnam, Belize, Albania, Norway, South Korea, Lithuania, Moldova, Madagascar, Mongolia, Botswana, Haiti, Suriname, Croatia, Yemen, Indonesia, Sierra Leone, Egypt, Estonia. A well-shaped logistics network and a partnership network guide us to conduct our units anywhere in the world promptly without undermining product quality.
A specific source of pride for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only experts, who already have experience in the range of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as stay in control.
To consult or book, contact us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |