We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822431201
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Piston diameter | 12 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 10 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822431201, call FAMAGA, the world's the best supplier of factory-made equipment. Our company has functioned for more than ten years - these are ages of experience, which are illustrated in the quality of products and personalseparate attention to each buyer. We value everyone, who worked with us - therefore, our regular buyers get the most favorable purchase conditions and discounts on the machine made streamlined equipment market. At present, there are more than 4500 such purchasers, and we constantly sign new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the globe Germany, United Kingdom, Iceland, Fiji, Italy, Myanmar, Morocco, Vietnam, Mozambique, Colombia, Philippines, Bahamas, Macedonia, Zimbabwe, Russia, Singapore, Canada, South Korea, Haiti, Syria, Finland, Egypt, The Bahamas, Antigua and Barbuda, East Timor, Rwanda, Afghanistan, Guatemala, Kenya, Belarus, Mongolia, Indonesia, Hungary, Costa Rica, Senegal, New Zealand, El Salvador, Ghana, Kuwait, Kiribati, Panama, North Korea, Benin, Tonga, Croatia, Peru, Dominica, Mexico. A well-developed logistics bond and a partnership network allow us to send our items anywhere in the world quickly without discrediting product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the sphere of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is growing every day. We are pleased that users choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as stay in control.
To get some advice or order, contact us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |