We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821301400
Description
Parts | Standard oil-mist lubricator |
Type of filling | Manual oil filling |
Housing | Die cast zinc |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 1800 l/min |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0821301400, contact FAMAGA, the world's main retailer of machine made equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of outcomes and particular attention to each purchaser. We praise everyone, who joined with us - therefore, our regular buyers bring in the most beneficial purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4 thousand such purchasers, and we constantly sign new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the planet Germany, United Kingdom, Mongolia, South Sudan, Dominican Republic, Palestine, Suriname, Switzerland, Seychelles, Honduras, Croatia, Papua New Guinea, Kiribati, Tajikistan, El Salvador, Romania, Oman, Poland, Zimbabwe, East Timor, Samoa, Mauritania, Guyana, Tunisia, Mauritius, Kyrgyzstan, Latvia, Egypt, Ukraine, Burkina Faso, Laos, Brunei, Israel, Haiti, Turkey, Uruguay, Angola, Montenegro, Nepal, India, United Arab Emirates, Tonga, United States, Andorra, Malaysia, Albania, Syria, Afghanistan. A well-shaped logistics connection and a partnership network allow us to ship our units anywhere in the planet with no delay without discrediting product quality.
A special source of repute for FAMAGA is its workers, each of whom contributes to common cause. We call into our team only experts, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been supplied, and this number is increasing every day. We are happy that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, phone us or write to the online chat on our official website. You can also send a list of the necessary equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Oil-mist lubricator, Can be assembled into blocks |
Parts | Standard oil-mist lubricator |
Mounting orientation | vertical |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Lubricator reservoir volume | 50 cm³ |
Type of filling | Manual oil filling |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The entire preset drip quantity enters the pressure system. Manual oil filling possible during operation. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Oil dosing at 1000 l/min | 1-2 drops |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |