We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412019825
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M6 |
Standardization | ISO 15524 |
Stroke | 10 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412019825, catch up with FAMAGA, the world's foremost retailer of mechanized equipment. Our company has advanced for more than ten years - these are years of experience, which are symbolized in the quality of merchandises and personalseparate attention to each customer. We esteem everyone, who engaged with us - therefore, our regular consumers bring in the most flexible purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly form new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Lithuania, Angola, Papua New Guinea, Syria, Djibouti, Afghanistan, Singapore, Cyprus, Honduras, Nigeria, Slovenia, Georgia, Japan, Eritrea, Comoros, Burma, Haiti, Benin, South Korea, South Sudan, North Korea, Zimbabwe, Paraguay, Brunei, Burkina Faso, India, Mozambique, Greece, Kuwait, Czech Republic, The Bahamas, Australia, Bangladesh, Jamaica, Turkey, Sweden, Iceland, Bolivia, Eswatini, Egypt, Tanzania, Panama, Pakistan, Costa Rica, Indonesia. A advanced logistics chains and a partnership network allow us to send our elements anywhere in the globe as soon as possible without disreputing product quality.
A particular source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of factory-made equipment.
All merchandises from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is growing every day. We are proud that users choose FAMAGA again and again, and we strive to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To consult or order, call us by phone or write to the online chat on our official website. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |