We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822061106
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Stroke | 100 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822061106, contact FAMAGA, the world's dominant producer of industrial equipment. Our company has functioned for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each consumer. We appreciate everyone, who joined with us - therefore, our regular purchasers receive the most acceptable purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 750 purchases are terminated per day, because FAMAGA operates all over the world Germany, United Kingdom, Macedonia, Lesotho, Palestine, Central African Republic, Djibouti, Cape Verde, Bulgaria, Hungary, Serbia, Romania, Ukraine, Bolivia, Bhutan, Norway, Costa Rica, Jordan, Gambia, Kazakhstan, Zambia, Montenegro, Panama, The Bahamas, Eswatini, Guyana, Slovakia, Finland, Iran, Comoros, Turkmenistan, Kuwait, Belize, Indonesia, Uruguay, Peru, Kyrgyzstan, Luxembourg, Samoa, Greece, Ghana, India, Malaysia. A well-built logistics bond and a partnership network let us to send our elements anywhere in the world on-time without disreputing product quality.
A specific source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of factory-made equipment.
All products from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that users choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, get in touch with us or write to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |