We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5727515280
Description
Switching principle | 5/4 |
Version | Diaphragm poppet valve |
Housing | Polyoxymethylene |
Sealing material | Acrylonitrile butadiene rubber |
Connector standard | EN 175301-803:2006 |
Protection class | IP65 |
Port size | EN 175301-803, form A |
Type | Plug |
Nominal flow Qn | 700 l/min |
Compressed air connection input | Ø 8x1 |
Compressed air connection output | Ø 8x1 |
Operational voltage AC at 50 Hz | 230 V |
Operational voltage AC at 60 Hz | 230 V |
Activation | Electrically |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5727515280, contact FAMAGA, the world's leading vendor of mechanized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are illustrated in the quality of products and personalseparate attention to each orderer. We respect everyone, who joined with us - so, our regular customers bring in the most flexible purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 3500 such customers, and we constantly sign new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Cape Verde, Cuba, Honduras, East Timor, Armenia, Iceland, Swaziland, Poland, Zambia, Chad, China, Kiribati, Eritrea, Togo, Sierra Leone, Jamaica, Nicaragua, Indonesia, Pakistan, Yemen, Norway, Liechtenstein, Switzerland, Azerbaijan, Burkina Faso, Mali, Suriname, Kazakhstan, South Sudan, New Zealand, The Gambia, Turkey, Syria, Lithuania, Comoros, Laos, Namibia, Benin, Brunei, Luxembourg, Denmark. A well-developed logistics network and a partnership network allow us to deliver our goods anywhere in the planet immediately without disreputing product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only experts, who already have experience in the sphere of machine made streamlined equipment.
All products from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this amount is rising every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or order, phone us or write to the online chat on our site. You can also dispatch a list of the needful equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Diaphragm poppet valve |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Blocking principle | Plate principle Single base plate principle |
Working pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | See table |
Connector standard | EN 175301-803:2006 |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Compatibility index | See table |
Duty cycle | 100 % |
Typ. switch-on time | 20 ms |
Typ. switch-off time | 54 ms |
Mounting on manifold strip | PRS strip |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX optional: ATEX version can be produced by combining the basic valve without coil with an ATEX coil. ATEX ID: see ATEX coils catalog page. NOTE:In order to ensure the operating function of the valve, do not fall below the minimum operating pressure of 3 bar ! |
Material |
---|
Housing | Polyoxymethylene |
Seals | Acrylonitrile butadiene rubber |