We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5727510220
Description
Switching principle | 5/4 |
Version | Diaphragm poppet valve |
Housing | Polyoxymethylene |
Sealing material | Acrylonitrile butadiene rubber |
Connector standard | EN 175301-803:2006 |
Protection class | IP65 |
Port size | EN 175301-803, form A |
Type | Plug |
Nominal flow Qn | 700 l/min |
Compressed air connection input | Ø 8x1 |
Compressed air connection output | Ø 8x1 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5727510220, contact FAMAGA, the world's major distributor of manufacturing equipment. Our company has functioned for more than ten years - these are ages of experience, which are outlined in the quality of outputs and personalseparate attention to each customer. We cherish everyone, who collaborated with us - so, our regular customers procure the most acceptable purchase terms and discounts on the industrial equipment market. At present, there are more than 4500 such customers, and we constantly form new agreements. More than 600 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Armenia, France, Burma, Sudan, Estonia, Serbia, Thailand, Kyrgyzstan, Finland, Japan, India, China, Saudi Arabia, Macedonia, Tajikistan, Cameroon, Liechtenstein, Bulgaria, Mali, Turkey, Switzerland, Fiji, Kenya, South Sudan, Israel, Botswana, Uruguay, Latvia, Ecuador, Suriname, Antigua and Barbuda, Swaziland, Bangladesh, Samoa, Paraguay, Albania, Benin, Argentina, Senegal, Iceland, Panama. A advanced logistics chains and a partnership network assist us to deliver our elements anywhere in the earth on-time without compromising product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been delivered, and this quantity is growing every day. We are proud that users choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as to stay on the top.
To request or place an order, call us by phone or write to the online chat on our site. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Diaphragm poppet valve |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Blocking principle | Plate principle Single base plate principle |
Working pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | See table |
Connector standard | EN 175301-803:2006 |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Compatibility index | See table |
Duty cycle | 100 % |
Typ. switch-on time | 20 ms |
Typ. switch-off time | 54 ms |
Mounting on manifold strip | PRS strip |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX optional: ATEX version can be produced by combining the basic valve without coil with an ATEX coil. ATEX ID: see ATEX coils catalog page. NOTE:In order to ensure the operating function of the valve, do not fall below the minimum operating pressure of 3 bar ! |
Material |
---|
Housing | Polyoxymethylene |
Seals | Acrylonitrile butadiene rubber |