We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480177278
Description
Functional principle | double-acting |
Cushioning | pneumatically,pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | 3/4-16 UNF |
Stroke | 254 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 1/2 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480177278, contact FAMAGA, the world's main retailer of machine made equipment. Our company has functioned for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and special attention to each user. We appreciate everyone, who joined with us - thus, our regular buyers procure the most attractive purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such consumers, and we constantly sign new agreements. More than 700 contracts are concluded per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Peru, Colombia, Romania, Zimbabwe, Laos, Lithuania, Suriname, Mexico, Namibia, Turkmenistan, Serbia, Iceland, The Bahamas, Estonia, Singapore, Qatar, El Salvador, Kuwait, Ireland, Morocco, Kiribati, Burundi, China, Jordan, Seychelles, Brazil, East Timor, Senegal, The Gambia, Bangladesh, Croatia, New Zealand, Haiti, Argentina, Madagascar, Mali, Niger, Egypt, Nepal, Finland, Kenya. A well-built logistics system and a partnership network let us to dispatch our units anywhere in the earth promptly without discrediting product quality.
A specific source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of machine made streamlined equipment.
All merchandises from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To consult or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the needful equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |