We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471321341
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 150 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 7471321341, catch up with FAMAGA, the world's the best supplier of industrialized equipment. Our company has operated for more than ten years - these are ages of experience, which are outlined in the quality of outputs and personalseparate attention to each user. We esteem everyone, who collaborated with us - hence, our regular consumers pick up the most helpful purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 4500 such consumers, and we constantly form new agreements. More than 750 agreements are achieved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Serbia, Nigeria, South Sudan, Indonesia, Slovenia, Grenada, Zimbabwe, Albania, Benin, Croatia, Ghana, Senegal, Vietnam, Belarus, United States, Georgia, Argentina, Estonia, Tanzania, Bosnia and Herzegovina, Latvia, Turkmenistan, Japan, Seychelles, Mauritania, Cape Verde, Guatemala, Kuwait, Malaysia, Ecuador, Peru, Denmark, Botswana, Tonga, Yemen, Jamaica, Swaziland, Switzerland, Mauritius, Costa Rica, Djibouti, Morocco, Mexico. A well-built logistics series and a partnership network let us to ship our goods anywhere in the world with no delay without disreputing product quality.
A special source of good name for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are verified - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this quantity is growing every day. We are glad that clients choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as stay in control.
To inquire or order, get in touch with us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |