We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting Aventics (brand of Emerson) R480176604, contact FAMAGA, the world's key producer of machine made equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of goods and special attention to each client. We respect everyone, who worked with us - hence, our regular clients accept the most favorable purchase terms and discounts on the industrial equipment market. At this moment, there are more than 3500 such clients, and we constantly form new agreements. More than 600 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Albania, Mongolia, El Salvador, Yemen, Honduras, Saudi Arabia, San Marino, Samoa, Ireland, Qatar, Bulgaria, Thailand, Bolivia, South Korea, Guatemala, Philippines, Brazil, Serbia, Kenya, Romania, Indonesia, Azerbaijan, The Bahamas, Mexico, Burkina Faso, Luxembourg, Mauritania, Morocco, Cyprus, Burundi, Finland, Tanzania, United States, Denmark, Kuwait, Croatia, Nepal, Togo, Haiti, Zimbabwe, Cape Verde, Sweden, Latvia. A well-elaborated logistics system and a partnership network let us to conduct our elements anywhere in the planet on-time without disreputing product quality.
A specific source of honor for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are happy that consumers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To inquire or book, get in touch with us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |