We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822060124
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Stroke | 125 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822060124, connect FAMAGA, the world's prime vendor of manufacturing equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and special attention to each purchaser. We praise everyone, who conspired with us - thus, our regular consumers pick up the most flexible purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such consumers, and we constantly arrange new agreements. More than 700 purchases are terminated per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Slovenia, Morocco, Denmark, Pakistan, Malawi, Lithuania, Cyprus, Haiti, Benin, Cape Verde, Colombia, North Korea, Tunisia, East Timor, Georgia, Romania, United States, Comoros, Peru, Indonesia, Tanzania, Luxembourg, Azerbaijan, Togo, Burundi, Finland, Ukraine, Mexico, Chile, Zimbabwe, New Zealand, Qatar, Nicaragua, Bolivia, Sierra Leone, Libya, South Korea, Mauritius, Mozambique, Austria, Jamaica, Thailand, Nepal, Andorra, Madagascar, Hungary. A well-elaborated logistics connection and a partnership network allow us to send our elements anywhere in the globe on-time without discrediting product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as stay in control.
To get some advice or place an order, contact us or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |