We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412006231
Description
Parts | Standard oil-mist lubricator |
Type of filling | Semi-automatic oil filling during operation,Manual oil filling |
Protective guard | with protective guard |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 3100 l/min |
Compressed air connection | G 3/8 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412006231, communicate with FAMAGA, the world's main producer of mechanized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are illustrated in the quality of products and particular attention to each buyer. We value everyone, who worked with us - therefore, our regular consumers get the most flexible purchase conditions and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4 thousand such consumers, and we constantly sign new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Liberia, Japan, Sierra Leone, Nigeria, Brazil, Burma, Norway, Chad, Ireland, Montenegro, Burkina Faso, Turkmenistan, Zambia, Ecuador, Samoa, Fiji, Armenia, Vietnam, Malawi, El Salvador, Azerbaijan, Lithuania, Kazakhstan, Uruguay, Ghana, Jordan, Guyana, Libya, Benin, Kyrgyzstan, Cyprus, North Korea, Argentina, Eswatini, Togo, Paraguay, Finland, Mali, Senegal, Laos, Bolivia. A well-shaped logistics chains and a partnership network help us to dispatch our items anywhere in the world immediately without undermining product quality.
A special source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this number is rising every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as keep on top of it.
To request or place an order, call us by phone or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Oil-mist lubricator, Can be assembled into blocks |
Parts | Standard oil-mist lubricator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Lubricator reservoir volume | 40 cm³ |
Type of filling | Semi-automatic oil filling during operation Manual oil filling |
Weight | 0,229 kg |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Electrical level detection only with ST6 sensor with reed contact, sensor holder included in the scope of the delivery. Sensor not included in scope of delivery, sensor installation prepared. The entire preset drip quantity enters the pressure system. Manual oil filling possible during operation at a maximum operating pressure of 10 bar. Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Oil dosing at 1000 l/min | 1-2 drops |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |