We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637844
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 20 mm |
Piston rod thread | M5 |
Standardization | ISO 15524 |
Stroke | 20 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480637844, connect FAMAGA, the world's influential supplier of mechanized equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of merchandises and personalseparate attention to each client. We understand everyone, who joined with us - therefore, our regular customers obtain the most desirable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such consumers, and we constantly make new agreements. More than 650 contracts are concluded per day, because FAMAGA supplies all over the globe Germany, United Kingdom, South Sudan, Azerbaijan, Sri Lanka, Samoa, South Korea, Netherlands, Cape Verde, Fiji, Israel, Nepal, Paraguay, Angola, United States, Jamaica, Brazil, Antigua and Barbuda, Finland, India, Guyana, Malta, Georgia, Ireland, Swaziland, Costa Rica, Kuwait, Malaysia, Burundi, Indonesia, Chile, Latvia, Ukraine, Vietnam, Belarus, Djibouti, Iceland, Brunei, Moldova, Egypt, Suriname, Benin, Nigeria. A well-elaborated logistics connection and a partnership network let us to send our items anywhere in the world promptly without compromising product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the field of industrial equipment.
All products from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To inquire or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note the selection of fittings for strokes < 10 mm . |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |