We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822061105
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Stroke | 75 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822061105, communicate with FAMAGA, the world's dominant producer of industrial equipment. Our company has functioned for more than ten years - these are years of experience, which are illustrated in the quality of products and private attention to each consumer. We appreciate everyone, who joined with us - therefore, our regular clients pick up the most acceptable purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly sign new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Zambia, Albania, Australia, Malawi, Myanmar, Bosnia and Herzegovina, Slovenia, Kiribati, Ghana, Laos, Tajikistan, Gambia, Lebanon, Mali, Uganda, Moldova, East Timor, Benin, Iran, Latvia, Andorra, Iceland, Guatemala, Argentina, Nicaragua, Malta, Bangladesh, Antigua and Barbuda, Kenya, Philippines, Slovakia, Pakistan, Tanzania, Haiti, Tunisia, Comoros, Kyrgyzstan, Iraq, Austria, Brunei, Denmark, Syria, Equatorial Guinea, China, Central African Republic, Indonesia. A well-shaped logistics bond and a partnership network assist us to dispatch our goods anywhere in the world as soon as possible without damaging product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are glad that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or make a request, get in touch with us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |