We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412014327
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 25 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412014327, call FAMAGA, the world's influential distributor of industrialized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are portrayed in the quality of goods and special attention to each consumer. We value everyone, who joined with us - so, our regular purchasers obtain the most convenient purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such buyers, and we constantly sign new agreements. More than 600 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, New Zealand, Morocco, Eritrea, India, Denmark, United Arab Emirates, Liechtenstein, Montenegro, Burma, Singapore, Australia, Norway, Georgia, Uganda, Antigua and Barbuda, Jamaica, Equatorial Guinea, East Timor, Turkmenistan, Rwanda, Thailand, Haiti, Sudan, Chile, Vietnam, Brazil, China, Austria, Mauritania, Sierra Leone, Dominica, Iceland, Libya, Niger, Tunisia, Jordan, Finland, North Korea, Tanzania, Kyrgyzstan, Lithuania, Indonesia, Mongolia, Kenya. A well-developed logistics link and a partnership network let us to dispatch our products anywhere in the world quickly without damaging product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only experts, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is rising every day. We are pleased that buyers choose FAMAGA again and again, and we are eager to make more developed and technologically modern industrial equipment so as keep on top of it.
To ask a question or make a request, contact us or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |