We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637834
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 12 mm |
Piston rod thread | M3 |
Standardization | ISO 15524 |
Stroke | 25 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480637834, contact FAMAGA, the world's primary producer of manufacturing equipment. Our company has progressed for more than ten years - these are ages of experience, which are depicted in the quality of products and individual attention to each consumer. We appreciate everyone, who conspired with us - therefore, our regular clients accept the most flexible purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such buyers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Oman, Israel, San Marino, Papua New Guinea, Syria, Sudan, Afghanistan, Chile, Switzerland, Honduras, Costa Rica, Thailand, Iceland, Swaziland, Iran, Samoa, Mexico, Nigeria, Georgia, United States, Fiji, Equatorial Guinea, Philippines, Japan, China, Poland, Guatemala, Panama, Belize, Estonia, Jordan, Vietnam, Kuwait, Yemen, Croatia, Suriname, Mauritius, Serbia, Malta, Cyprus, Ireland, Malaysia, Haiti. A well-developed logistics link and a partnership network allow us to deliver our units anywhere in the earth as soon as possible without undermining product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All goods from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To request or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note the selection of fittings for strokes < 10 mm . |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |