We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480177219
Description
Functional principle | double-acting |
Cushioning | pneumatically,pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | 3/4-16 UNF |
Stroke | 50.8 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 1/2 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480177219, call FAMAGA, the world's central provider of mechanized equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and personalseparate attention to each client. We value everyone, who cooperated with us - thus, our regular customers pick up the most attractive purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly compose new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Ecuador, Dominican Republic, South Africa, Madagascar, Mozambique, The Gambia, Guatemala, United Arab Emirates, Colombia, Equatorial Guinea, Swaziland, Peru, Nepal, Bangladesh, East Timor, Moldova, Suriname, Senegal, Pakistan, Panama, Czech Republic, Poland, Malta, Djibouti, Turkmenistan, Togo, Antigua and Barbuda, Iceland, Kuwait, Ghana, Jamaica, South Sudan, Finland, Bolivia, Belarus, China, Angola, El Salvador, Zambia, Malaysia, Switzerland, Comoros, Samoa, United States, Australia, Benin, Serbia. A well-elaborated logistics connection and a partnership network allow us to send our products anywhere in the planet as soon as possible without compromising product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |