We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822064000
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Stroke | 25 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822064000, make contact with FAMAGA, the world's prime supplier of industrial equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and private attention to each orderer. We praise everyone, who conspired with us - therefore, our regular consumers pick up the most desirable purchase terms and discounts on the industrial equipment market. At this moment, there are more than 3500 such clients, and we constantly sign new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Cape Verde, Guyana, Myanmar, Lesotho, Canada, Equatorial Guinea, Mongolia, Australia, Brazil, Tunisia, Singapore, Bhutan, Austria, Monaco, Azerbaijan, Ecuador, Kuwait, Turkmenistan, Saudi Arabia, Bulgaria, Moldova, Costa Rica, Sudan, Samoa, Israel, Togo, Hungary, Peru, Comoros, Belize, Uzbekistan, Zambia, India, Ghana, Chile, Central African Republic, Rwanda, Iceland, Nigeria, Latvia, Mali, Slovakia, Iraq, Montenegro, Thailand, Denmark, Turkey, Paraguay. A well-elaborated logistics system and a partnership network allow us to ship our units anywhere in the world as soon as possible without disreputing product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the range of industrial equipment.
All products from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as stay in control.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |