We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822125010
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 400 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822125010, communicate with FAMAGA, the world's dominant company of industrialized equipment. Our company has operated for more than ten years - these are years of experience, which are described in the quality of products and special attention to each orderer. We cherish everyone, who engaged with us - therefore, our regular clients bring in the most acceptable purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 4000 such clients, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, Nigeria, Nepal, Saudi Arabia, Burma, Mozambique, Palestine, Chad, Portugal, Benin, Czech Republic, Nicaragua, Philippines, Sweden, Antigua and Barbuda, Malta, Sierra Leone, United Arab Emirates, Oman, Eswatini, Croatia, Thailand, Bhutan, The Gambia, Jordan, Ghana, Hungary, Kazakhstan, Ecuador, Bosnia and Herzegovina, Mongolia, China, Mexico, Burundi, Costa Rica, Liechtenstein, Andorra, Yemen, Senegal, Malaysia, Uganda, Tajikistan, Mali, India, Comoros, Armenia, Norway. A well-shaped logistics link and a partnership network cheer us to send our goods anywhere in the earth as soon as possible without damaging product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are glad that users choose FAMAGA again and again, and we are glad to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To inquire or make a request, get in touch with us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |