We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412011209
Description
Standardization | ISO 15407-1 |
Type | MS01-PA test block, variant I, with 2 x 3/2-directional valve |
Version | 8x |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Polyamide fiber-glass reinforced |
Protection class | IP65 |
Port size | form C |
Type | Plug |
Compressed air connection input | G 1/4 |
Compressed air connection output | Ø 6x1 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412011209, catch up with FAMAGA, the world's major distributor of streamlined equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of goods and particular attention to each customer. We praise everyone, who conspired with us - so, our regular consumers accept the most favorable purchase forms and discounts on the industrial equipment market. At present, there are more than 3500 such buyers, and we constantly sign new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Brunei, Singapore, China, Vietnam, Italy, Uganda, Fiji, Angola, Papua New Guinea, Laos, Niger, United States, Egypt, Kyrgyzstan, Kenya, Poland, Slovakia, Bolivia, Russia, Argentina, Benin, Azerbaijan, Tajikistan, Panama, Ecuador, Armenia, Swaziland, Ghana, Philippines, El Salvador, Botswana, Albania, Burkina Faso, Cyprus, Chile, Cape Verde, Samoa, Sweden, Madagascar, Croatia, Indonesia, Seychelles. A well-shaped logistics link and a partnership network let us to send our products anywhere in the globe with no delay without undermining product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of manufacturing equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. Now, more than 10 million units of products have been supplied, and this amount is rising every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To get some advice or order, phone us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Grid dimension | 27 mm |
Standards | ISO 15407-1 26 mm |
Working pressure min./max. | 4 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
DC operating voltage | 24 V |
Voltage tolerance DC | -10% / +10% |
Protection class With valve plug connector | IP65 |
Duty cycle | 100 % |
Electrical connection for valve | Plug, form C |
Electr. connection | Plug, M12, 5-pin |
Valve voltage tolerance | -10% / +10% |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pressure regulator is preset at 3 bar . Expansion options available for pilot valves. |
Material |
---|
End plates | Aluminum |
Seal | Acrylonitrile butadiene rubber |
Subbase | Polyamide fiber-glass reinforced |