We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472406097
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 150 mm |
Sealing material | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 7472406097, catch up with FAMAGA, the world's dominant company of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are illustrated in the quality of outcomes and individual attention to each consumer. We understand everyone, who conspired with us - therefore, our regular clients accept the most beneficial purchase forms and discounts on the manufacturing equipment market. Today, there are more than 3500 such clients, and we constantly compose new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the earth Germany, United Kingdom, Bangladesh, Azerbaijan, Mali, Mongolia, Bhutan, Congo, North Korea, Eswatini, Chad, Egypt, Mexico, Czech Republic, Austria, Yemen, Albania, Senegal, Afghanistan, Zambia, Andorra, Mozambique, Kyrgyzstan, Malaysia, Russia, Nigeria, Qatar, Benin, Equatorial Guinea, Sweden, Ukraine, Denmark, Rwanda, Slovakia, Montenegro, Armenia, Latvia, Namibia, Hungary, Burundi, Central African Republic, Macedonia, Uganda, Thailand. A well-shaped logistics series and a partnership network allow us to conduct our units anywhere in the planet immediately without discrediting product quality.
A specific source of honor for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the sphere of machine made streamlined equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been supplied, and this amount is increasing every day. We are glad that consumers choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as stay in control.
To inquire or order, get in touch with us or send a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |