We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001350
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M12 |
Standardization | ISO 21287 |
Stroke | 60 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R422001350, call FAMAGA, the world's principle distributor of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are described in the quality of merchandises and individual attention to each orderer. We esteem everyone, who liased with us - thus, our regular purchasers bring in the most convenient purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA works all over the earth Germany, United Kingdom, Zimbabwe, The Gambia, Guatemala, Pakistan, Japan, Colombia, United Arab Emirates, Togo, Nicaragua, Rwanda, Bulgaria, Latvia, Brunei, New Zealand, Namibia, Morocco, Senegal, Benin, Switzerland, Kazakhstan, Afghanistan, Tanzania, Tunisia, Finland, Norway, Slovakia, Monaco, Equatorial Guinea, Estonia, Bolivia, Mexico, Poland, Kuwait, Albania, Turkey, Egypt, Seychelles, Philippines, Costa Rica, Luxembourg, Haiti, Sweden. A well-developed logistics link and a partnership network allow us to ship our goods anywhere in the world quickly without disreputing product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the sphere of machine made streamlined equipment.
All outputs from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are glad that clients choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as stay in control.
To get some advice or order, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Front plate | Aluminum |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |