We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822062024
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Stroke | 125 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822062024, get in touch with FAMAGA, the world's prime distributor of manufacturing equipment. Our company has progressed for more than ten years - these are years of experience, which are described in the quality of spare parts and private attention to each user. We understand everyone, who conspired with us - therefore, our regular purchasers pick up the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Lebanon, Bangladesh, China, Syria, Cyprus, Paraguay, Georgia, Brazil, Burkina Faso, Kiribati, Equatorial Guinea, Canada, Rwanda, Myanmar, Palestine, Mozambique, Grenada, Liberia, Thailand, El Salvador, Mauritius, Russia, Belize, Israel, Sudan, Bulgaria, Fiji, Namibia, Uganda, Nepal, Eswatini, Lithuania, Laos, Azerbaijan, Ecuador, Finland, Denmark, India, Senegal, Chile, Libya, Antigua and Barbuda, Kazakhstan, Kyrgyzstan. A well-built logistics connection and a partnership network let us to dispatch our goods anywhere in the world as soon as possible without disreputing product quality.
A special source of good name for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are pleased that customers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or book, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |