Aventics (brand of Emerson) R480627553
  Aventics (brand of Emerson) R480627553

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R480627553 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R480627553

Description

Functional principle double-acting
Cushioning pneumatically
adjustable
Magnetic piston with magnetic piston
Piston diameter 320 mm
Piston rod thread M48x2
Standardization ISO 15552
Stroke 200 mm
Sealing material Acrylonitrile butadiene rubber
Scraper Acrylonitrile butadiene rubber
ATEX optional
Compressed air connection G 1
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R480627553

If you are questing Aventics (brand of Emerson) R480627553, call FAMAGA, the world's principle company of manufacturing equipment. Our company has functioned for more than ten years - these are cycles of experience, which are described in the quality of spare parts and special attention to each consumer. We value everyone, who engaged with us - hence, our regular buyers procure the most convenient purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such consumers, and we constantly compose new agreements. More than 750 purchases are terminated per day, because FAMAGA operates all over the world . A well-built logistics link and a partnership network guide us to dispatch our goods anywhere in the earth with no delay without discrediting product quality.

A specific source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the sphere of machine made streamlined equipment.

All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as not to lower the bar.

To consult or book, contact us or send a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.

Features R480627553

Standards ISO 15552
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 2 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Clamping piece for magnetic field sensor necessary
The trunnion mounting is positioned in the center at the factory and can be adjusted later. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator.
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Acrylonitrile butadiene rubber
Nut for piston rod Steel, galvanized
Scraper Acrylonitrile butadiene rubber
Trunnion mounting Nodular graphite iron
Tie-rods Stainless steel