We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472408200
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 80 mm |
Sealing material | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 7472408200, make contact with FAMAGA, the world's key retailer of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are portrayed in the quality of goods and particular attention to each customer. We praise everyone, who collaborated with us - therefore, our regular consumers procure the most convenient purchase conditions and discounts on the machine made streamlined equipment market. At present, there are more than 4000 such consumers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the earth Germany, United Kingdom, San Marino, Portugal, Madagascar, Yemen, Eritrea, Jamaica, East Timor, Palestine, Nigeria, Belarus, United Arab Emirates, Poland, Mongolia, Cyprus, Mexico, Latvia, Togo, United States, Vietnam, Burkina Faso, Pakistan, Syria, Morocco, Bolivia, Norway, Indonesia, Kazakhstan, Russia, Panama, Samoa, The Gambia, Slovakia, Luxembourg, Ireland, Tajikistan, Nepal, Costa Rica, Albania, Philippines, Antigua and Barbuda. A advanced logistics chains and a partnership network guide us to ship our goods anywhere in the globe quickly without undermining product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been provided, and this number is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or book, call us by phone or write to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |