We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471320419
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 250 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 7471320419, call FAMAGA, the world's primary supplier of industrialized equipment. Our company has operated for more than ten years - these are years of experience, which are represented in the quality of merchandises and personalseparate attention to each customer. We value everyone, who cooperated with us - thus, our regular buyers accept the most helpful purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such consumers, and we constantly form new agreements. More than 750 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Italy, Myanmar, Yemen, Nepal, Monaco, Malaysia, Haiti, Burma, Laos, Poland, Bolivia, Comoros, Lithuania, Vietnam, Madagascar, Brunei, Cape Verde, Egypt, Togo, Mozambique, United States, Costa Rica, Dominica, China, Macedonia, Swaziland, Bulgaria, Switzerland, Benin, Philippines, Israel, Albania, Mauritania, The Gambia, Sweden, Tajikistan, Pakistan, Qatar, Malta. A well-developed logistics link and a partnership network assist us to dispatch our items anywhere in the earth quickly without compromising product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the direction of manufacturing equipment.
All spare parts from FAMAGA are verified - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been delivered, and this number is growing every day. We are glad that users choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To inquire or place an order, contact us or write a message to the online chat on our site. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |