We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting Aventics (brand of Emerson) R480176573, call FAMAGA, the world's principle distributor of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of spare parts and personalseparate attention to each client. We value everyone, who engaged with us - hence, our regular clients pick up the most helpful purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such buyers, and we constantly form new agreements. More than 750 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Dominica, Kyrgyzstan, Angola, Hungary, Brunei, Georgia, Seychelles, Slovenia, South Sudan, Azerbaijan, Burundi, Costa Rica, Liechtenstein, Benin, Panama, Rwanda, Burkina Faso, Malta, Laos, Eswatini, Bulgaria, Cape Verde, Djibouti, Libya, Guatemala, Sierra Leone, Mauritius, Nigeria, Uruguay, Australia, Kenya, Qatar, Luxembourg, Israel, Switzerland, Kiribati, Montenegro, Slovakia, Latvia, Norway, Antigua and Barbuda, Tanzania, Mozambique, Iceland, Armenia. A well-elaborated logistics connection and a partnership network allow us to send our products anywhere in the planet quickly without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more progressive and technologically developed industrial equipment so as to stay on the top.
To inquire or book, contact us or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |