We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627551
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 320 mm |
Piston rod thread | M48x2 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Acrylonitrile butadiene rubber |
ATEX optional | |
Compressed air connection | G 1 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480627551, call FAMAGA, the world's dominant producer of streamlined equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and individual attention to each customer. We value everyone, who worked with us - so, our regular clients pick up the most desirable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly make new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, East Timor, Jamaica, Croatia, Guatemala, Japan, Saudi Arabia, Albania, Moldova, Panama, Yemen, Samoa, Morocco, Peru, Libya, Benin, Netherlands, Poland, South Korea, Zimbabwe, Vietnam, Latvia, Kazakhstan, Qatar, Malaysia, Mozambique, Mauritania, Costa Rica, Brunei, Fiji, Comoros, Madagascar, Cyprus, Tajikistan, Denmark, Slovakia, Afghanistan, Andorra, Suriname, Australia. A well-developed logistics chains and a partnership network allow us to deliver our goods anywhere in the planet quickly without undermining product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as stay in control.
To request or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
The trunnion mounting is positioned in the center at the factory and can be adjusted later. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Acrylonitrile butadiene rubber |
Nut for piston rod | Steel, galvanized |
Scraper | Acrylonitrile butadiene rubber |
Trunnion mounting | Nodular graphite iron |
Tie-rods | Stainless steel |