We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627713
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 320 mm |
Piston rod thread | M48x2 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Acrylonitrile butadiene rubber |
ATEX optional | |
Compressed air connection | G 1 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480627713, communicate with FAMAGA, the world's top supplier of industrial equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of products and personalseparate attention to each buyer. We cherish everyone, who collaborated with us - hence, our regular customers obtain the most flexible purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly compose new agreements. More than 750 contracts are concluded per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Mauritius, Philippines, Malaysia, Egypt, Monaco, Bahamas, Chad, Finland, Brazil, United Arab Emirates, Swaziland, Pakistan, Suriname, Albania, Paraguay, United States, Grenada, Japan, Mozambique, Poland, Tajikistan, Switzerland, Madagascar, Ghana, Cyprus, Qatar, Seychelles, Belarus, Haiti, Yemen, South Sudan, Mexico, Indonesia, Panama, Russia, Eswatini, Chile, Latvia, Denmark, Sweden, New Zealand. A well-elaborated logistics series and a partnership network let us to send our elements anywhere in the planet with no delay without compromising product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the direction of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that users choose FAMAGA again and again, and we are pleased to make more progressive and technologically advanced industrial equipment so as stay in control.
To inquire or place an order, call us by phone or write a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Acrylonitrile butadiene rubber |
Nut for piston rod | Steel, galvanized |
Scraper | Acrylonitrile butadiene rubber |
Tie-rods | Stainless steel |