We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822244404
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822244404, connect FAMAGA, the world's major retailer of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are illustrated in the quality of products and private attention to each customer. We understand everyone, who liased with us - thus, our regular customers procure the most favorable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such customers, and we constantly form new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Barbados, Panama, Vietnam, Poland, Canada, Liechtenstein, United States, Israel, Djibouti, Sweden, Guatemala, Mauritius, Benin, Bulgaria, Belarus, Gambia, Fiji, Latvia, Afghanistan, Guyana, Cape Verde, Kuwait, Thailand, Bolivia, Switzerland, Madagascar, Seychelles, South Sudan, Suriname, Georgia, Brunei, Nepal, Togo, Jamaica, Macedonia, Czech Republic, Swaziland, Ukraine, Costa Rica, Sudan. A well-built logistics link and a partnership network allow us to deliver our goods anywhere in the world promptly without disreputing product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as stay in control.
To ask a question or place an order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |