We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for Aventics (brand of Emerson) R480176559, reach FAMAGA, the world's main vendor of streamlined equipment. Our company has advanced for more than ten years - these are years of experience, which are illustrated in the quality of goods and private attention to each orderer. We admire everyone, who joined with us - hence, our regular buyers bring in the most acceptable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such clients, and we constantly form new agreements. More than 750 proceedings are resolved per day, because FAMAGA works all over the earth Germany, United Kingdom, Lesotho, Nigeria, San Marino, Mongolia, Papua New Guinea, Dominican Republic, Senegal, Croatia, Czech Republic, Indonesia, Greece, Burma, Paraguay, Chad, Netherlands, Kyrgyzstan, Syria, Ghana, Georgia, Uruguay, Turkmenistan, New Zealand, Cameroon, Fiji, Namibia, Algeria, Costa Rica, Zambia, Laos, Central African Republic, Thailand, Bosnia and Herzegovina, Norway, Bangladesh, Iraq, Lithuania, Kenya, Samoa, Swaziland, Equatorial Guinea, Finland, Tonga, North Korea. A well-shaped logistics bond and a partnership network guide us to ship our goods anywhere in the earth with no delay without discrediting product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All spare parts from FAMAGA are assured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more progressive and technologically developed industrial equipment so as to stay on the top.
To ask a question or book, contact us or send a message to the online chat on our official website. You can also forward a list of the needful equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |