We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480177111
Description
Functional principle | double-acting |
Cushioning | pneumatically |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | 3/4-16 UNF |
Stroke | 304.8 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 3/8 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480177111, call FAMAGA, the world's top provider of industrial equipment. Our company has existed for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and special attention to each buyer. We value everyone, who collaborated with us - so, our regular buyers receive the most attractive purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such customers, and we constantly form new agreements. More than 600 contracts are concluded per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Colombia, Venezuela, Pakistan, Myanmar, Benin, Guinea-Bissau, Grenada, Dominican Republic, Italy, Burma, Sweden, Norway, Indonesia, New Zealand, Egypt, Guinea, Japan, Yemen, South Sudan, Madagascar, Bosnia and Herzegovina, Nepal, Denmark, Haiti, Costa Rica, United Arab Emirates, Tunisia, Belarus, Nicaragua, Ireland, United States, Zimbabwe, Syria, Antigua and Barbuda, Estonia, Azerbaijan, Guatemala, Luxembourg, Niger, The Gambia, Uganda, Georgia, Brazil, Bolivia, Switzerland. A well-built logistics series and a partnership network let us to dispatch our products anywhere in the planet with no delay without discrediting product quality.
A specific source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as keep on top of it.
To consult or place an order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |