We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480148009
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480148009, catch up with FAMAGA, the world's prime supplier of streamlined equipment. Our company has progressed for more than ten years - these are years of experience, which are described in the quality of merchandises and individual attention to each user. We appreciate everyone, who conspired with us - therefore, our regular clients bring in the most convenient purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4 thousand such purchasers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the world Germany, United Kingdom, Honduras, Bahrain, Botswana, Palestine, United States, Sri Lanka, Malawi, Cuba, Dominican Republic, Guinea, Dominica, Kenya, Brunei, Uruguay, Mauritania, Bhutan, Monaco, Swaziland, Russia, Indonesia, Singapore, Morocco, Eswatini, Zimbabwe, Haiti, Vietnam, Cameroon, Burkina Faso, Fiji, Guatemala, Ireland, Tajikistan, East Timor, Tunisia, Luxembourg, Ecuador, Egypt, Serbia, Slovakia, Georgia, Bangladesh, Jamaica, Niger, Togo, Bolivia. A advanced logistics series and a partnership network guide us to conduct our items anywhere in the world immediately without damaging product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as stay in control.
To request or order, call us by phone or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |