We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1825503176
Description
Standardization | ISO 5599-1 |
Frame size | ISO 2 |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Aluminum |
Type | Blanking plate |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 1825503176, get in touch with FAMAGA, the world's primary retailer of industrial equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of merchandises and individual attention to each purchaser. We admire everyone, who liased with us - hence, our regular purchasers obtain the most desirable purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4500 such clients, and we constantly sign new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Sweden, North Korea, Australia, Mexico, Eswatini, Swaziland, Kiribati, Yemen, Uganda, Serbia, India, Eritrea, Estonia, Burkina Faso, Afghanistan, Tajikistan, Libya, Netherlands, East Timor, Indonesia, Philippines, Russia, Bangladesh, Mauritania, Nicaragua, Liechtenstein, Guatemala, Brazil, Guyana, Equatorial Guinea, China, Croatia, The Gambia, Malaysia, Rwanda, Pakistan, Mozambique, Cyprus, Burundi, United Arab Emirates, Seychelles, Albania, Laos. A advanced logistics connection and a partnership network help us to conduct our elements anywhere in the planet immediately without compromising product quality.
A particular source of good name for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All outcomes from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been provided, and this amount is rising every day. We are happy that clients choose FAMAGA again and again, and we strive to make more advanced and technologically innovative industrial equipment so as stay in control.
To consult or order, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 5599-1 |
Working pressure min./max. | -0,9 ... 16 bar |
Ambient temperature min./max. | 0 ... 80 °C |
Medium temperature min./max. | 0 ... 80 °C |
Medium | Compressed air |
Mounting screw | with hexagon socket |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Base plate | Aluminum Die-cast aluminum |
Seal | Acrylonitrile butadiene rubber |