We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822060104
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Stroke | 50 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822060104, connect FAMAGA, the world's top company of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of items and special attention to each consumer. We respect everyone, who collaborated with us - therefore, our regular buyers pick up the most flexible purchase forms and discounts on the industrial equipment market. Today, there are more than 4 thousand such buyers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the planet Germany, United Kingdom, South Africa, Nepal, Morocco, Serbia, East Timor, Belgium, United States, Lebanon, Croatia, Israel, Nigeria, Sweden, Sierra Leone, Afghanistan, Azerbaijan, Vietnam, Norway, Jamaica, The Bahamas, Mauritania, Tonga, Denmark, Burkina Faso, Argentina, Algeria, Finland, Samoa, Mongolia, Swaziland, Kyrgyzstan, Syria, Hungary, Comoros, North Korea, Panama, Madagascar, South Korea, Yemen, Togo, Zimbabwe. A well-elaborated logistics bond and a partnership network let us to ship our items anywhere in the planet as soon as possible without disreputing product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is increasing every day. We are happy that customers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To ask a question or book, contact us or write a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |