We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822344606
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822344606, get in touch with FAMAGA, the world's foremost distributor of streamlined equipment. Our company has functioned for more than ten years - these are ages of experience, which are described in the quality of merchandises and particular attention to each orderer. We appreciate everyone, who conspired with us - hence, our regular clients obtain the most convenient purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4000 such customers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Palestine, Mauritius, Congo, Costa Rica, Benin, Sri Lanka, Papua New Guinea, South Korea, Slovenia, Chad, Switzerland, Kazakhstan, Mali, Zimbabwe, Romania, Kuwait, Cameroon, Saudi Arabia, Estonia, Nigeria, Japan, United Arab Emirates, Angola, Comoros, Ukraine, Kiribati, Afghanistan, Israel, Nicaragua, Guatemala, Russia, Belize, Egypt, Argentina, Syria, Montenegro, Fiji, Austria, Yemen, Kenya, Jamaica, China, Morocco, Latvia, Dominica, Peru, Malaysia, Tonga. A well-elaborated logistics series and a partnership network cheer us to conduct our items anywhere in the world promptly without damaging product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of factory-made equipment.
All outputs from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are pleased that customers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as stay in control.
To consult or book, contact us or write to the online chat on our official website. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |