We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1025300000
Description
Functional principle | Single-acting, retracted without pressure |
Piston diameter | 160 mm |
Piston rod thread | M20 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 1025300000, call FAMAGA, the world's dominant company of industrialized equipment. Our company has existed for more than ten years - these are years of experience, which are expressed in the quality of products and particular attention to each consumer. We appreciate everyone, who liased with us - so, our regular customers pick up the most helpful purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 4500 such purchasers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the earth Germany, United Kingdom, Swaziland, Chile, Russia, Indonesia, Malaysia, Turkey, China, Mauritius, Philippines, Mali, Finland, Senegal, Belize, East Timor, Andorra, Denmark, Equatorial Guinea, The Gambia, Slovakia, Tonga, Lithuania, Eswatini, Rwanda, Liberia, Bosnia and Herzegovina, United States, Liechtenstein, Brazil, Namibia, Montenegro, Azerbaijan, Kazakhstan, Thailand, Macedonia, North Korea, Luxembourg, Uganda, Yemen, Algeria, Botswana, Norway, Kenya. A well-built logistics link and a partnership network help us to deliver our goods anywhere in the earth with no delay without compromising product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only experts, who already have experience in the sphere of machine made streamlined equipment.
All outcomes from FAMAGA are assured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is amounting every day. We are glad that customers choose FAMAGA again and again, and we are eager to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To ask a question or order, get in touch with us or write to the online chat on our site. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 8 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Diaphragm actuator strokes are tolerance-dependent. Tolerance at 40 mm , 50 mm , 80 mm stroke: ± 3 mm |
Material |
---|
Cylinder tube | Steel |
Piston rod | Steel |
Front cover | Steel |
Seal | Acrylonitrile butadiene rubber |