We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471323208
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 32 mm |
Piston rod thread | M10x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 500 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 7471323208, connect FAMAGA, the world's foremost supplier of mechanized equipment. Our company has existed for more than ten years - these are ages of experience, which are portrayed in the quality of products and particular attention to each customer. We praise everyone, who cooperated with us - thus, our regular clients bring in the most acceptable purchase terms and discounts on the manufacturing equipment market. At this time, there are more than 3500 such clients, and we constantly arrange new agreements. More than 750 contracts are concluded per day, because FAMAGA supplies all over the world Germany, United Kingdom, Kyrgyzstan, Nicaragua, Singapore, Bulgaria, Guyana, Cyprus, Angola, Bangladesh, Georgia, Vietnam, Ghana, Slovenia, Bahamas, Burma, Croatia, Ukraine, Mozambique, Cape Verde, Yemen, Swaziland, Serbia, Paraguay, Liberia, South Sudan, Brunei, Netherlands, Kuwait, Jamaica, Ecuador, Brazil, Fiji, Russia, Burkina Faso, The Gambia, Belize, Botswana, India, Kiribati, Albania, Dominica, Indonesia, Algeria, Guatemala, Finland, South Korea, Philippines, Morocco, Suriname. A well-shaped logistics link and a partnership network let us to conduct our units anywhere in the earth with no delay without damaging product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only experts, who already have experience in the direction of manufacturing equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been supplied, and this quantity is amounting every day. We are glad that buyers choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To request or make a request, contact us or write to the online chat on our site. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |