We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822242404
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822242404, make contact with FAMAGA, the world's foremost distributor of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and private attention to each orderer. We understand everyone, who engaged with us - therefore, our regular customers accept the most flexible purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such customers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Suriname, Antigua and Barbuda, Zimbabwe, Denmark, Zambia, Macedonia, Burma, India, Mali, Costa Rica, Azerbaijan, Turkmenistan, El Salvador, Canada, Iceland, United States, Uruguay, Slovakia, Bosnia and Herzegovina, Oman, Israel, Syria, Norway, Sierra Leone, Japan, Armenia, Switzerland, Indonesia, Tanzania, Kenya, Iran, Kiribati, Bolivia, Austria, Egypt, Guatemala, Kyrgyzstan, Philippines, Iraq, Eswatini, Bulgaria, Czech Republic, Australia, Nigeria, Malta, Malaysia. A well-developed logistics network and a partnership network guide us to deliver our items anywhere in the globe as soon as possible without disreputing product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of factory-made equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or book, contact us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |