We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412009184
Description
Parts | Filter pressure regulator |
Condensate drain | semi-automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
lockable | lockable |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 14000 l/min |
Compressed air connection | G 1 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412009184, contact FAMAGA, the world's foremost company of industrial equipment. Our company has existed for more than ten years - these are years of experience, which are expressed in the quality of goods and individual attention to each consumer. We understand everyone, who engaged with us - so, our regular purchasers pick up the most favorable purchase terms and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly form new agreements. More than 700 purchases are terminated per day, because FAMAGA operates all over the globe Germany, United Kingdom, Romania, Benin, Burkina Faso, Kuwait, Mexico, Latvia, Suriname, Albania, Serbia, Guyana, Greece, Tanzania, Brunei, Uganda, Gambia, Costa Rica, Norway, Tajikistan, Croatia, Fiji, Mozambique, Kenya, India, Madagascar, Czech Republic, Poland, Seychelles, Malaysia, Andorra, Afghanistan, Libya, Angola, Equatorial Guinea, United Arab Emirates, Sudan, Russia, Brazil, Peru, South Korea, Cyprus, Antigua and Barbuda, Togo, Indonesia, Guatemala, Slovakia. A advanced logistics bond and a partnership network guide us to dispatch our goods anywhere in the globe quickly without compromising product quality.
A specific source of good name for FAMAGA is its employees, each of whom contributes to our work. We request into our team only experts, who already have experience in the range of manufacturing equipment.
All goods from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this amount is growing every day. We are pleased that users choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To inquire or order, phone us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 14000 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 87 cm³ |
Filter element | exchangeable |
Max. Internal air consumption | 1,5 l/min |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |