We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822497103
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M12 |
Standardization | NFE 49004 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822497103, call FAMAGA, the world's dominant provider of machine made equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of goods and private attention to each consumer. We esteem everyone, who joined with us - thus, our regular buyers procure the most desirable purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4500 such purchasers, and we constantly sign new agreements. More than 650 transactions are made per day, because FAMAGA works all over the earth Germany, United Kingdom, San Marino, Colombia, Portugal, Czech Republic, Saudi Arabia, Luxembourg, Ecuador, Russia, Belize, Turkey, Slovakia, Chad, Jordan, Kiribati, Iceland, Liechtenstein, Norway, Australia, Algeria, Bulgaria, Tunisia, Angola, Rwanda, Seychelles, Andorra, Kenya, Uruguay, Greece, Pakistan, Nepal, North Korea, Syria, Burundi, Burkina Faso, Moldova, Senegal, Laos, Estonia, Hungary, Malaysia, Sudan, Tajikistan. A well-elaborated logistics connection and a partnership network let us to send our goods anywhere in the globe with no delay without compromising product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the sphere of machine made streamlined equipment.
All items from FAMAGA are affirmed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are glad that clients choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or order, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |