We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822396600
Description
Piston rod modification | non-rotating, with front plate,Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Standardization | NFE 49004 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822396600, contact FAMAGA, the world's leading vendor of streamlined equipment. Our company has functioned for more than ten years - these are cycles of experience, which are illustrated in the quality of products and private attention to each purchaser. We esteem everyone, who joined with us - therefore, our regular clients receive the most favorable purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4000 such clients, and we constantly make new agreements. More than 650 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Côte d\'Ivoire, Papua New Guinea, South Africa, Netherlands, Burma, Bulgaria, Botswana, Bahamas, Malta, Croatia, Palestine, North Korea, Uganda, Libya, Ecuador, Zambia, Namibia, Nigeria, Equatorial Guinea, Liberia, Chad, Uruguay, Eswatini, Qatar, Ghana, Brunei, Macedonia, Iceland, Iraq, Nicaragua, Slovakia, Mauritania, Mauritius, Kenya, Azerbaijan, Tonga, Afghanistan, Rwanda, Central African Republic, Moldova, Pakistan, Austria, Bolivia, Tunisia, Andorra. A well-shaped logistics bond and a partnership network allow us to dispatch our elements anywhere in the planet promptly without damaging product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that customers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Scraper | Polyurethane |