We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R402000297
Description
| Functional principle | double-acting |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 10 mm |
| Stroke | 25 mm |
| Housing | Aluminum |
| Sealing material | Polyurethane |
| Compressed air connection | M5 |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) R402000297, reach FAMAGA, the world's top provider of manufacturing equipment. Our company has functioned for more than ten years - these are cycles of experience, which are depicted in the quality of outputs and personalseparate attention to each buyer. We praise everyone, who joined with us - thus, our regular clients pick up the most beneficial purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such clients, and we constantly arrange new agreements. More than 600 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Bahamas, Malawi, Italy, Slovenia, Ecuador, Monaco, Sweden, Hungary, Grenada, Switzerland, Kenya, Eritrea, Bolivia, Belgium, Yemen, Croatia, Guatemala, Burkina Faso, Botswana, Chad, El Salvador, Zimbabwe, Cape Verde, Macedonia, Morocco, Central African Republic, Albania, Benin, Tunisia, Comoros, Paraguay, Russia, Serbia, Philippines, Togo, Iran, Madagascar, Tajikistan, Poland, Chile, Kuwait, Mongolia, United Arab Emirates, Djibouti. A well-shaped logistics system and a partnership network help us to deliver our units anywhere in the globe on-time without damaging product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to our work. We call into our team only specialists, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are glad that users choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as stay in control.
To inquire or make a request, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
| Working pressure min./max. | See table |
| Ambient temperature min./max. | -10 ... 70 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| Weight | See table |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
| Material |
|---|
| Housing | Aluminum, anodized |
| Seal | Polyurethane |
| Front plate | Steel, galvanized |
| Guide rod | Stainless steel |
| Bearing | Sintered bronze |
| Piston rod | Stainless steel |
