We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1670520000
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 6431 |
Stroke | 200 mm |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 1670520000, contact FAMAGA, the world's chief supplier of mechanized equipment. Our company has worked for more than ten years - these are cycles of experience, which are portrayed in the quality of outcomes and special attention to each buyer. We appreciate everyone, who liased with us - so, our regular buyers get the most favorable purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4500 such consumers, and we constantly form new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, Palestine, Netherlands, Congo, Lebanon, Uzbekistan, Uganda, South Korea, Eritrea, Ukraine, Togo, Chad, Macedonia, Honduras, Thailand, Tonga, Slovakia, Rwanda, Argentina, Monaco, Jordan, Bosnia and Herzegovina, Nigeria, China, Uruguay, Syria, Lithuania, Moldova, Philippines, Austria, Afghanistan, Burundi, Laos, North Korea, Kiribati, Morocco, Bulgaria, El Salvador, Czech Republic, Burkina Faso, Australia, Albania, Norway, India. A well-developed logistics system and a partnership network allow us to send our units anywhere in the earth with no delay without discrediting product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All products from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this amount is rising every day. We are glad that purchasers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as keep on top of it.
To get some advice or make a request, phone us or write to the online chat on our site. You can also send a list of the needful equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6431 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 75 °C |
Medium temperature min./max. | -20 ... 75 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Ø25 mm is not according to ISO 6431 |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel, chrome-plated |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Acrylonitrile butadiene rubber |