We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822497102
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M12 |
Standardization | NFE 49004 |
Stroke | 15 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822497102, make contact with FAMAGA, the world's top supplier of factory-made equipment. Our company has progressed for more than ten years - these are years of experience, which are described in the quality of merchandises and individual attention to each buyer. We admire everyone, who worked with us - therefore, our regular clients obtain the most convenient purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4 thousand such buyers, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Macedonia, Jamaica, Cyprus, Estonia, Liberia, Sierra Leone, Seychelles, Libya, Djibouti, Comoros, South Sudan, Denmark, Guyana, Egypt, Mauritius, Tajikistan, Sweden, India, Pakistan, Cameroon, Ukraine, Madagascar, Austria, Panama, Kuwait, Dominica, Moldova, Russia, El Salvador, Samoa, Yemen, Guatemala, Mexico, Vietnam, Malaysia, Lithuania, Angola, Iraq, Bolivia, Turkey, Poland, Afghanistan. A advanced logistics bond and a partnership network let us to conduct our goods anywhere in the world as soon as possible without damaging product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the range of manufacturing equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is increasing every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as stay in control.
To consult or book, phone us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |