We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting Aventics (brand of Emerson) R480176356, get in touch with FAMAGA, the world's dominant supplier of machine made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are depicted in the quality of products and personalseparate attention to each customer. We respect everyone, who worked with us - hence, our regular clients accept the most beneficial purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly arrange new agreements. More than 750 affairs are settled per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Mongolia, Panama, Portugal, Togo, Samoa, Ecuador, Indonesia, Bulgaria, Peru, Slovenia, Brunei, Macedonia, Angola, Mozambique, Oman, Chad, Netherlands, Haiti, Zambia, Egypt, Eswatini, Iceland, Nepal, Turkey, Djibouti, Syria, Zimbabwe, Israel, Philippines, Croatia, Guatemala, Sweden, Poland, Yemen, Cape Verde, Switzerland, Brazil, Malaysia, Jamaica, Luxembourg, Central African Republic, Latvia, Swaziland. A well-elaborated logistics chains and a partnership network allow us to send our items anywhere in the planet with no delay without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of manufacturing equipment.
All products from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as keep on top of it.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |