We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822060000
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Stroke | 10 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822060000, make contact with FAMAGA, the world's influential vendor of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and private attention to each purchaser. We respect everyone, who worked with us - thus, our regular purchasers procure the most favorable purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Hungary, Albania, Chad, Benin, Mozambique, Tanzania, Bahamas, Colombia, Honduras, Costa Rica, Algeria, Burkina Faso, Bhutan, Nicaragua, Haiti, Argentina, Bolivia, Morocco, El Salvador, Jamaica, South Sudan, Rwanda, Indonesia, Zambia, Chile, Japan, Sierra Leone, United States, Russia, Cameroon, Thailand, Cape Verde, Estonia, Madagascar, Angola, Nepal, Zimbabwe, Guatemala, Pakistan, Ghana, Luxembourg, China, Mauritania, Croatia, East Timor, Tajikistan. A well-shaped logistics bond and a partnership network allow us to ship our units anywhere in the world as soon as possible without damaging product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to our work. We call into our team only experts, who already have experience in the range of factory-made equipment.
All spare parts from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically modern industrial equipment so as stay in control.
To inquire or book, contact us or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |